The config looks fine. I guess it's just a cabling problem. ""Mark Odette II"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Ok guys and gals...Here's the situation that I hope someone can slap me on > the back of the head and go, you dummy, you forgot to do that! > ... and then tell me what to do to fix it. > > I have two 1700 routers with 12.1.5YBx IOS code running, and each has a > WIC-1DSU-T1 card in them. > > Very simple Back-To-Back lab... at least you would think. > > I've double-checked to make sure that my STP cable has pins 1,2 and 4,5 > reversed... 1 to 4 (wire color orange/white) and 2 to 5 (wire color solid > orange). > > I've put in on one router only, the Service-Module T1 Clock Source Internal > command, and have even gone the extra measure of hand coding the line code, > and frame commands - B8ZS and ESF. > > I've changed the LBO to none, and -15db on both units in mirror image > fashion. > > I've specified Timeslots All and Timeslots 1-24 speed 64 on both routers in > mirror fashion. > > Still.... NADA. > > The following is the config's and their associated Show Service Module S0 > outputs. > > Somebody, please tell me what the heck I'm doing wrong!! > > I can configure this on the old DB60 cabling configuration all day long with > no problem at all. > > ------------------------------------------------ > Router A: > > interface Serial0 > ip address 10.1.1.1 255.255.255.252 > encapsulation ppp > service-module t1 lbo -15db > service-module t1 timeslots 1-24 > > RouterA#sh int s0 > Serial0 is down, line protocol is down > Hardware is PQUICC with Fractional T1 CSU/DSU > Internet address is 10.1.1.1/30 > MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation PPP, loopback not set > Keepalive set (10 sec) > LCP Closed > Closed: IPCP, CDPCP > Last input 01:07:20, output 01:07:20, output hang never > Last clearing of "show interface" counters 00:48:15 > Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0 > Queueing strategy: weighted fair > Output queue: 0/1000/64/0 (size/max total/threshold/drops) > Conversations 0/1/256 (active/max active/max total) > Reserved Conversations 0/0 (allocated/max allocated) > Available Bandwidth 1152 kilobits/sec > 5 minute input rate 0 bits/sec, 0 packets/sec > 5 minute output rate 0 bits/sec, 0 packets/sec > 0 packets input, 0 bytes, 0 no buffer > Received 0 broadcasts, 0 runts, 0 giants, 0 throttles > 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort > 0 packets output, 0 bytes, 0 underruns > 0 output errors, 0 collisions, 98 interface resets > 0 output buffer failures, 0 output buffers swapped out > 0 carrier transitions > DCD=down DSR=up DTR=up RTS=up CTS=down > > RouterA#sh service-module s0 > Module type is T1/fractional > Hardware revision is 0.88, Software revision is 0.2, > Image checksum is 0xED22BEC5, Protocol revision is 0.1 > Transmitter is sending remote alarm. > Receiver has loss of frame, > Framing is ESF, Line Code is B8ZS, Current clock source is line, > Fraction has 24 timeslots (64 Kbits/sec each), Net bandwidth is 1536 > Kbits/sec. > Last user loopback performed: > no loopback > duration 01:49:32 > Last module self-test (done at startup): Passed > Last clearing of alarm counters 00:55:40 > loss of signal : 0, > loss of frame : 1, current duration 00:55:40 > AIS alarm : 0, > Remote alarm : 0, > Module access errors : 0, > Total Data (last 18 15 minute intervals): > 2746 Line Code Violations, 510 Path Code Violations > 1185 Slip Secs, 9840 Fr Loss Secs, 6636 Line Err Secs, 0 Degraded Mins > 0 Errored Secs, 0 Bursty Err Secs, 3 Severely Err Secs, 9837 Unavail > Secs > Data in current interval (606 seconds elapsed): > 0 Line Code Violations, 0 Path Code Violations > 0 Slip Secs, 606 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins > 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 606 Unavail Secs > > > RouterB: > interface Serial0 > ip address 10.1.1.2 255.255.255.252 > encapsulation ppp > no ip route-cache > no ip mroute-cache > no fair-queue > service-module t1 clock source internal > service-module t1 lbo -15db > service-module t1 timeslots 1-24 > > RouterB#sh int s0 > Serial0 is down, line protocol is down > Hardware is PQUICC with Fractional T1 CSU/DSU > Internet address is 10.1.1.2/30 > MTU 1500 bytes, BW 1536 Kbit, DLY 20000 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation PPP, loopback not set > Keepalive set (10 sec) > LCP Closed > Closed: IPCP, CDPCP > Last input never, output never, output hang never > Last clearing of "show interface" counters 00:53:57 > Queueing strategy: fifo > Output queue 0/40, 0 drops; input queue 0/75, 0 drops > 5 minute input rate 0 bits/sec, 0 packets/sec > 5 minute output rate 0 bits/sec, 0 packets/sec > 0 packets input, 0 bytes, 0 no buffer > Received 0 broadcasts, 0 runts, 0 giants, 0 throttles > 0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort > 0 packets output, 0 bytes, 0 underruns > 0 output errors, 0 collisions, 1 interface resets > 0 output buffer failures, 0 output buffers swapped out > 0 carrier transitions > DCD=down DSR=up DTR=up RTS=up CTS=down > > RouterB#sh service-module s0 > Module type is T1/fractional > Hardware revision is 0.96, Software revision is 0.2, > Image checksum is 0xED22BEC5, Protocol revision is 0.1 > Transmitter is sending remote alarm. > Receiver has loss of signal, loss of frame, > Framing is ESF, Line Code is B8ZS, Current clock source is internal, > Fraction has 24 timeslots (64 Kbits/sec each), Net bandwidth is 1536 > Kbits/sec. > Last module self-test (done at startup): Passed > Last clearing of alarm counters 00:53:13 > loss of signal : 1, current duration 00:53:04 > loss of frame : 1, current duration 00:53:04 > AIS alarm : 0, > Remote alarm : 0, > Module access errors : 0, > Total Data (last 3 15 minute intervals): > 440 Line Code Violations, 0 Path Code Violations > 20 Slip Secs, 2700 Fr Loss Secs, 97 Line Err Secs, 0 Degraded Mins > 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 2700 Unavail > Secs > Data in current interval (487 seconds elapsed): > 0 Line Code Violations, 0 Path Code Violations > 0 Slip Secs, 487 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins > 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 487 Unavail Secs > > Thanks, > Mark Odette II
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35433&t=35431 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]