You will need to connect to the console of the IDS. Log in as netrangr (note: NO "e" in netrangr). Default Passord: "attack" Then enter: #sysconfig-sensor
You will see a menu: 1 - IP Address 2 - IP Netmask 3 - IP Host Name 4 - Default Route 5 - Network Access Control 6 - Communications Infrastructure 7 - Date/Time and Timezone 8 - Passwords 9 - Secure Communications x - Exit At a minimum you will need to configure 1, 2, 4, 5 and 6 (for #5 enter the network that the CSPM server resides on. If its 192.168.15.0/24, enter 192.168.15.) For #6, write down the info you assign the IDS. You will need this for the CSPM. You will need org. number (such as "1"), Node # (such as "1") and org name (like your domain name). HTH, Rob. CCIE 6922 ""Shane Stockman"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I am currently setting up a IDS sensor 4210 and would like to know how to > set up the command interface and the monitoring interface as I would like to > manage it from my CSPM server. > > I need to get the command interface to talk to the switch but I don't know > where to set an ip address for it so that my CSPM software cna find it. > > Thanks in advance. > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35956&t=35940 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
