Login as root. The default password is "attack". You need to login as root to run "sysconfig-sensor".
Login as netrangr to monitor the IDS status and to check log files. Regards, cheekin ----- Original Message ----- From: "Rob Webber" To: Sent: Wednesday, February 20, 2002 11:05 PM Subject: Re: IDS 4210 help [7:35940] > You will need to connect to the console of the IDS. Log in as netrangr > (note: NO "e" in netrangr). Default Passord: "attack" Then enter: > #sysconfig-sensor > > You will see a menu: > > 1 - IP Address > > 2 - IP Netmask > > 3 - IP Host Name > > 4 - Default Route > > 5 - Network Access Control > > 6 - Communications Infrastructure > > 7 - Date/Time and Timezone > > 8 - Passwords > > 9 - Secure Communications > > x - Exit > > At a minimum you will need to configure 1, 2, 4, 5 and 6 (for #5 enter the > network that the CSPM server resides on. If its 192.168.15.0/24, enter > 192.168.15.) For #6, write down the info you assign the IDS. You will need > this for the CSPM. You will need org. number (such as "1"), Node # (such as > "1") and org name (like your domain name). > > HTH, Rob. > > CCIE 6922 > > ""Shane Stockman"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > I am currently setting up a IDS sensor 4210 and would like to know how to > > set up the command interface and the monitoring interface as I would like > to > > manage it from my CSPM server. > > > > I need to get the command interface to talk to the switch but I don't know > > where to set an ip address for it so that my CSPM software cna find it. > > > > Thanks in advance. > > > > _________________________________________________________________ > > Get your FREE download of MSN Explorer at > http://explorer.msn.com/intl.asp. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36017&t=35940 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
