type part flash 1 in config mode. If it turns into 1 giant read only flash, change confreg to 0x2101 ""Cisco Nuts"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello, > Just upgraded the flash on 2 of my 2524 routers from 8 to 16 and on > rebooting the router, I get this: > > 8192K bytes of processor board System flash partition 1 (Read ONLY) > 8192K bytes of processor board System flash partition 2 (Read/Write) > > I was expecting to see this as I saw when I upgraded my 2514: > > 16384K bytes of processor board System flash (Read ONLY) > > I also see this in the #sh ru output: > partition flash 2 8 8 > > What is this cmd. exactly doing? Is there a way of getting one big 16mb > flash so I can load the Enterprise IOS? > > Thank you for your help. > > BTW: I have this on my 2524: > ROM: System Bootstrap, Version 11.0(5), SOFTWARE > cisco 2524 (68030) processor (revision B) with 4096K/2048K bytes of memory > > _________________________________________________________________ > Join the worlds largest e-mail service with MSN Hotmail. > http://www.hotmail.com
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35998&t=35989 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
