Cisco Nuts wrote: > > Just upgraded the flash on 2 of my 2524 routers from 8 to 16 and on > rebooting the router, I get this: > > 8192K bytes of processor board System flash partition 1 (Read ONLY) > 8192K bytes of processor board System flash partition 2 (Read/Write)
You have to unpartition flash with "no partition flash" command. It might be needed to erase flash firts, I'm not sure. You since it is ReadOnly, set config register to "0x2101", reboot router, erase and unpartition flash. While still in flash-load-helper image, upgrade IOS. Sasa CCIE No 8635 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36003&t=35989 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
