You can assign them a specific IP and/or privledges based on username using
radius.

-----Original Message-----
From: Patrick Ramsey [mailto:[EMAIL PROTECTED]]
Sent: Monday, February 25, 2002 12:29 PM
To: [EMAIL PROTECTED]
Subject: dialup mac address [7:36394]


hey group....

I've got a 3640 with a couple'a pri's and two modem banks... I want to give
vendors access to very specific servers through a firewall... (netscreen) 
My original thought was to place the vendor's mac address for it's dialup
adapter in dhcp and assign it the same ip every time....then base the ACL's
to each server on the vendor ip address...

All the searching I have done on the web say dialup adapters have generic
mac addresses, ie 44-45-53-54-00-00 ... How can I get the 3640 to dole out
specfic ip's to vendors?  How do isp's keep up with leases if this is the
case?

-Patrick


>>>>>>>>>>>>>  Confidentiality Disclaimer   <<<<<<<<<<<<<<<<
This email and any files transmitted with it may contain confidential and
/or proprietary information in the possession of WellStar Health System,
Inc. ("WellStar") and is intended only for the individual or entity to whom
addressed.  This email may contain information that is held to be
privileged, confidential and exempt from disclosure under applicable law. If
the reader of this message is not the intended recipient, you are hereby
notified that any unauthorized access, dissemination, distribution or
copying of any information from this email is strictly prohibited, and may
subject you to criminal and/or civil liability. If you have received this
email in error, please notify the sender by reply email and then delete this
email and its attachments from your computer. Thank you.

================================================================




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=36408&t=36394
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to