Hello, Without using any AAA server, you nac assign specific IP address by using dialer pool .
Mohannad Khuffash PalTel ""Patrick Ramsey"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > hey group.... > > I've got a 3640 with a couple'a pri's and two modem banks... I want to give > vendors access to very specific servers through a firewall... (netscreen) > My original thought was to place the vendor's mac address for it's dialup > adapter in dhcp and assign it the same ip every time....then base the ACL's > to each server on the vendor ip address... > > All the searching I have done on the web say dialup adapters have generic > mac addresses, ie 44-45-53-54-00-00 ... How can I get the 3640 to dole out > specfic ip's to vendors? How do isp's keep up with leases if this is the > case? > > -Patrick > > > >>>>>>>>>>>>> Confidentiality Disclaimer This email and any files transmitted with it may contain confidential and > /or proprietary information in the possession of WellStar Health System, > Inc. ("WellStar") and is intended only for the individual or entity to whom > addressed. This email may contain information that is held to be > privileged, confidential and exempt from disclosure under applicable law. If > the reader of this message is not the intended recipient, you are hereby > notified that any unauthorized access, dissemination, distribution or > copying of any information from this email is strictly prohibited, and may > subject you to criminal and/or civil liability. If you have received this > email in error, please notify the sender by reply email and then delete this > email and its attachments from your computer. Thank you. > > ================================================================ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36415&t=36394 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]