thanks for the info -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Roberts, Larry Sent: Tuesday, February 26, 2002 8:33 AM To: [EMAIL PROTECTED] Subject: RE: pix question [7:36500]
Oops, typo alert. The Global statement should read: Global (outside) # a.b.c.d netmask 255.255.255.0 Thanks Larry -----Original Message----- From: Roberts, Larry Sent: Tuesday, February 26, 2002 11:34 AM To: 'george gittins'; [EMAIL PROTECTED] Subject: RE: pix question [7:36500] Well, if I understand your question correctly, you want to have a specific subnet always get the same external address ? Nat (inside) # 10.20.30.0 255.255.255.0 Global (outside) # a.b.c.d 255.255.255.0 # = unique number that is not used already on your PIX. Most people use 1 as the first group. Just pick a number that is unique and apply it to both the NAT statement for the inside address's and the Global outside address that they get. That is how the NAT is associated with the specific global statement. A.b.c.d is our outside address that they always get. 10.20.30.0 255.255.255.0 is the inside network(s) that get translated. If you want to add multiple internal networks to that specific global address, then you only net to add additional NAT statements using the same unique identifier (#). Thanks Larry -----Original Message----- From: george gittins [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 26, 2002 10:41 AM To: [EMAIL PROTECTED] Subject: pix question [7:36500] I have a pool of ip address im assigning as they leave my internal network. Is their a way i can assign specific global ip address to inside networks. George Gittins Internet Systems Manager Weslaco, Tx 78599 Phone (956)9696557 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36539&t=36500 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]