I posted something a couple of months back. unlike on a frame relay switch, you do the route statement on only one of the interfaces.
for example: interface ATM0/1/0 no ip address no ip directed-broadcast atm ilmi-keepalive ! interface ATM0/1/1 no ip address no ip directed-broadcast atm ilmi-keepalive atm pvc 1 101 interface ATM0/1/0 1 100 this works fine - 1/0 is PVC 1 100 and 1/1 is pvc 1/101 make sense? chuck ""D Rick"" wrote in message news:[EMAIL PROTECTED].; > Does anyone have experience in cfg on LS1010? I have hard time getting my > PVC under an interface. I'm running ver 11.3 > > > Thanks in advance, > Rick Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36911&t=36909 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
