It should look something like the following. You only have to configure one of the interfaces. Configure the attached routers with the proper pvc for its interface.
config t int atm 0/0/0 atm pvc 0 35 int atm 0/1/0 0 36 http://www.cisco.com/univercd/cc/td/doc/product/atm/ls1010s/wa3/11_2_8/sw_cn fg/vir_circ.htm#xtocid154924 > -----Original Message----- > From: D Rick [mailto:[EMAIL PROTECTED]] > Sent: Thursday, February 28, 2002 7:39 PM > To: [EMAIL PROTECTED] > Subject: Config PVC on LS1010 [7:36909] > > > Does anyone have experience in cfg on LS1010? I have hard > time getting my > PVC under an interface. I'm running ver 11.3 > > > Thanks in advance, > Rick Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36912&t=36909 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]