Look at the second line of the output below. It appears that you have 3000 series software on a 2500. I don't even know what a 3000 router is! Then again, even your boot ROMs say they are for a 3000.
Hmm.... I have no idea what the deal is there. If I were you I'd upgrade the DRAM and flash and then do an IOS upgrade, if possible. John >>> "Hamdi, Tarig" 3/1/02 8:07:42 AM >>> I have a Cisco 2500 with Ethernet interface, ISDN and 2 serial interfaces. When I do a show version I don't see the Serial interfaces. Is it possible that the IOS version is only for ISDN and doesn't register Serial Interfaces? Below is the output from sh ver: Cisco Internetwork Operating System Software IOS (tm) 3000 Software (IGS-G-L), Version 11.0(5), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Mon 05-Feb-96 23:39 by hochan Image text-base: 0x0301C994, data-base: 0x00001000 ROM: System Bootstrap, Version 5.2(8a), RELEASE SOFTWARE ROM: 3000 Bootstrap Software (IGS-RXBOOT), Version 10.2(8a), RELEASE SOFTWARE (fc1) routerA uptime is 3 days, 1 hour, 23 minutes System restarted by power-on System image file is "flash:igs-g-l.110-5", booted via flash cisco 2500 (68030) processor (revision D) with 1020K/1024K bytes of memory. Processor board ID 03863347, with hardware revision 00000000 Bridging software. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface. 1 ISDN Basic Rate interface. 32K bytes of non-volatile configuration memory. 4096K bytes of processor board System flash (Read ONLY) regards Tarig Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36975&t=36968 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
