John, You might want to try using the aggregate-address command and see what magic happens. As a side note.. IGP's summarize, whereas BGP being an EGP aggregates.
watch the word wrap.. http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fipr rp_r/bgp_r/1rfbgp1.htm#xtocid1 Nigel ----- Original Message ----- From: "John Neiberger" To: Sent: Sunday, March 03, 2002 12:30 AM Subject: Summarization?? What's that? (bug report) > While attempting to summarize some prefixes in BGP I got the > following: > > R3#conf t > Enter configuration commands, one per line. End with CNTL/Z. > R3(config)#router bgp 2010 > R3(config-router)#summa? > % Unrecognized command > R3(config-router)#summar? > % Unrecognized command > R3(config-router)#summar > ^ > % Invalid input detected at '^' marker. > > R3(config-router)#? > Router configuration commands: > address-family Enter Address Family command mode > aggregate-address Configure BGP aggregate entries > auto-summary Enable automatic network number > summarization > bgp BGP specific commands > default Set a command to its defaults > default-information Control distribution of default > information > default-metric Set metric of redistributed routes > distance Define an administrative distance > distribute-list Filter networks in routing updates > exit Exit from routing protocol configuration > mode > help Description of the interactive help > system > maximum-paths Forward packets over multiple paths > neighbor Specify a neighbor router > network Specify a network to announce via BGP > no Negate a command or set its defaults > redistribute Redistribute information from another > routing protocol > synchronization Perform IGP synchronization > table-map Map external entry attributes into > routing table > timers Adjust routing timers > > R3(config-router)# > > I'm thinking it might be tough to do summarization when the > freaking command is missing!! > > This is a 2500 running 12.1(11) Enterprise Plus. Too weird. I > didn't find a bug report for it on CCO but I can't be the only > person to run into this. > > Since I don't feel like doing un upgrade right now, I'll skip > that part. > > John > _________________________________________________________________ > Commercial lab list: http://www.groupstudy.com/list/commercial.html > Please discuss commercial lab solutions on this list. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37093&t=37093 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]