Is this a AS5300? If so then check that you have the latest VCWare on your VFCs. This has been a bug for a long time and it might have been addressed in one of the VCWare releases.
Tarek -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chuck Sent: Sunday, March 03, 2002 7:12 PM To: [EMAIL PROTECTED] Subject: Re: VoIP problem [7:36396] a look at TAC error message decoder yields this result: 1. %VTSP-3-DSP_TIMEOUT: DSP timeout on event [dec]: DSP ID=[hex]: [chars] A timeout on the digital signal processor (DSP) response has occurred. Recommended Action: The DSP has been reset automatically. If the problem persists, contact your Cisco technical support representative. Related documents: No specific documents apply to this error message. you need a CCO login to access this, I believe. http://www.cisco.com/cgi-bin/Support/Errordecoder/home.pl Seems to me that 12.2.4 rings a bell in terms of being just plain bad code. Maybe an IOS upgrade ( or downgrade ) ? ""Patrick Donlon"" wrote in message news:[EMAIL PROTECTED].; > Hi all > > I've a problem with a voice router I'm getting DSP timeout errors on the far > end (egress) router and I was wondering if anyone has any ideas. See the > text below for the error, it appears after the call is disconnected with > "normal call clearing", we use E1s. A reboot will make the problem go away > for a short while and we using 12.2(4)T on a 3640. The call routing is fine > and I can make csim calls from the far end router to my local router and to > my phone no problem, in the other direction I get DSP timeouts. > > Cheers > > Pat > > 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP Disc > (call mode=0) > 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP error > stats (call mode=1658181684), chnl info(1, 0, 0) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37122&t=36396 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]