Have you got "login" enabled and "transport input all" enabled.
Phil. --- Mike Dickson wrote: > I have a 2501 router whose console (and aux) port > doesn't respond when > connected to a 2511 and accessed via reverse telnet. > The 2511 reports the > connection is open, but I never get back a prompt > from the 2501. The > console port works when directly connected to the > serial port of my laptop. > Also, I've switched cables between the problem 2501 > and other routers in my > lab, and the problem follows the 2501, not the cable > nor the line on the > 2511. I've tried the 'clear line #' command, but it > doesn't help. > > Any ideas? > > TIA > > Mike Dickson > MCSE+Internet, MCDBA, CCNP, CCDP > Dickson Network Designs > voice (512)-422-3192 fax (512) 394-0320 > www.dicksonnetworks.com [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37160&t=37160 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]