-----Original Message----- From: Gyorfy, Shawn Sent: Monday, March 04, 2002 11:34 AM To: '[EMAIL PROTECTED]' Subject: RE: 2501 console port doesn't respond to reverse telnet connection [7:37150]
^^x CTRL+SHIFT+6 And X Disconnect 1 - check out the term, make sure baud rate and flow are set correctly on the 2511. Show terminal shawn -----Original Message----- From: Matthew Kessler [mailto:[EMAIL PROTECTED]] Sent: Monday, March 04, 2002 11:27 AM To: [EMAIL PROTECTED] Subject: Fw: 2501 console port doesn't respond to reverse telnet connection [7:37150] ----- Original Message ----- From: "Mike Dickson" To: Sent: Monday, March 04, 2002 9:47 AM Subject: 2501 console port doesn't respond to reverse telnet connection [7:37150] > I have a 2501 router whose console (and aux) port doesn't respond when > connected to a 2511 and accessed via reverse telnet. The 2511 reports the > connection is open, but I never get back a prompt from the 2501. The > console port works when directly connected to the serial port of my laptop. > Also, I've switched cables between the problem 2501 and other routers in my > lab, and the problem follows the 2501, not the cable nor the line on the > 2511. I've tried the 'clear line #' command, but it doesn't help. > > Any ideas? > > TIA > > Mike Dickson > MCSE+Internet, MCDBA, CCNP, CCDP > Dickson Network Designs > voice (512)-422-3192 fax (512) 394-0320 > www.dicksonnetworks.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37165&t=37165 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
