The asynch line configuration on the 2511: line 1 16 no exec modem InOut transport input all
The console config on all of my lab routers, including the problem router: line con 0 exec-timeout 0 0 The other routers work just fine; this one doesn't. Moreover, the problem router works fine if I'm using a direct connection between a computer's serial port and the console, but doesn't when using a connection to the 2511. Mike -----Original Message----- From: Phil Barker [mailto:[EMAIL PROTECTED]] Sent: Monday, March 04, 2002 9:26 AM To: Mike Dickson; [EMAIL PROTECTED] Subject: Re: 2501 console port doesn't respond to reverse telnet connection [7:37150] Have you got "login" enabled and "transport input all" enabled. Phil. --- Mike Dickson wrote: > I have a 2501 router whose console (and aux) port > doesn't respond when > connected to a 2511 and accessed via reverse telnet. > The 2511 reports the > connection is open, but I never get back a prompt > from the 2501. The > console port works when directly connected to the > serial port of my laptop. > Also, I've switched cables between the problem 2501 > and other routers in my > lab, and the problem follows the 2501, not the cable > nor the line on the > 2511. I've tried the 'clear line #' command, but it > doesn't help. > > Any ideas? > > TIA > > Mike Dickson > MCSE+Internet, MCDBA, CCNP, CCDP > Dickson Network Designs > voice (512)-422-3192 fax (512) 394-0320 > www.dicksonnetworks.com [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Everything you'll ever need on one web page from News and Sport to Email and Music Charts http://uk.my.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37163&t=37163 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]