According to CCO link (watch for wrap) http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/c5krn/sw_rns/78_ 5861.htm , "all of the Catalyst 5000 family supervisor engine 4.x software releases require a minimum of 16-MB RAM installed on your supervisor engine. All Catalyst 5000 family supervisor engines with at least 16-MB DRAM fully support software release 4.x." Software release 5.x and above won't support the Cat5000 Supervisor I. Cisco recommends the software version 4.5(13a) for the Cat5000 Supervisor I.
As for firmware, still looking. Shawn K. -----Original Message----- From: Curtis Phillips [mailto:[EMAIL PROTECTED]] Sent: Tuesday, March 05, 2002 9:43 AM To: [EMAIL PROTECTED] Subject: catalyst 5000 software/firmware [7:37269] Does anyone have any clear concise reference links to areas describing firmware upgrade options for the Catalyst 5000? Are chip replacements required to do so? Anyidea what limitations for software and firmware levels are for the Supervisor 1 engine? Thanks, Curtis Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37277&t=37269 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
