Ranma-
Oh, I almost forgot to mention.
When you issue a "Show Diag" at the enable prompt, you should see something
to the affect of : Packet Voice DSP Module Slot 0:
Number of DSPs: 2 <-- indicates a 4V 1750 HW configuration;
1= 2V HW configuration.
This might help in identifying if you do in fact have the Hardware
requirments to support the Voice Cards.
Mark
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Ranma
Sent: Tuesday, March 05, 2002 12:46 AM
To: [EMAIL PROTECTED]
Subject: Cisco 1750 VIC-2 E/M Voice card problem [7:37236]
Hi,
anyone has the following problem ?
I have an Cisco 1750 - 4V chassis and 2 voice E&M Card
Now after follow Cisco Recomendation and using IOS 12.1(5)T
the machine cannot recognize the Voice E&M Daughter cards.
And use "show run" , no voice-port appear.
After claiming RMA with Cisco, the same problem appear in the new Router.
Anyone have the solution to this problem?
Kenny
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=37304&t=37236
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
