OH... Thanks ""Mark Odette II"" wrote in message news:[EMAIL PROTECTED].; > Ranma- > Oh, I almost forgot to mention. > > When you issue a "Show Diag" at the enable prompt, you should see something > to the affect of : Packet Voice DSP Module Slot 0: > > Number of DSPs: 2 1= 2V HW configuration. > > This might help in identifying if you do in fact have the Hardware > requirments to support the Voice Cards. > > Mark > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Ranma > Sent: Tuesday, March 05, 2002 12:46 AM > To: [EMAIL PROTECTED] > Subject: Cisco 1750 VIC-2 E/M Voice card problem [7:37236] > > > Hi, > > anyone has the following problem ? > > I have an Cisco 1750 - 4V chassis and 2 voice E&M Card > > Now after follow Cisco Recomendation and using IOS 12.1(5)T > the machine cannot recognize the Voice E&M Daughter cards. > > > And use "show run" , no voice-port appear. > > After claiming RMA with Cisco, the same problem appear in the new Router. > > > > Anyone have the solution to this problem? > > Kenny
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37343&t=37236 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]