You don't disable STP on the port to the PC because STP is only run between Layer2 devices. I believe you are referring to PortFast.
Elmer ----- Original Message ----- From: "Brian" To: Sent: Wednesday, March 06, 2002 2:34 AM Subject: Re: Cat 2950-24 [7:37374] > If you connect a computer to a switch port, it takes spanning tree a bit to > allow traffic to pass. If this is an individual host being connected, you > could try disabling spanning tree on the port.. > > Bri > > ----- Original Message ----- > From: "Ismail Al-Shelh" > To: > Sent: Tuesday, March 05, 2002 10:44 PM > Subject: Cat 2950-24 [7:37374] > > > > Dear all > > We have Pc with 3Com 3c90x-Tx 10/100 Network Card. This PC is installed > > with Dos 6.22 Operating System. We used to connect this to our 3com > > Switch1100 with the dos driver provided by 3Com. The sequence of loading > > the 3com driver to connect to 3com Switch1100 is as follows: > > LSL.COM > > 3C90X.EXE > > IPXODI.COM > > NETX.EXE > > F: > > LOGIN > > This is in a batch file and when we run the batch file it will connect > > immediately. > > The problem I am facing while connect to CISCO CATALYST 2950-24 port is > that > > If I am > > running the same batch file it will not connect. > > I have to load the LSL.COM first and port on switch to which this computer > > is connected will be in Green color. But When > > I will load 3c90x.exe immediately the port on the switch color becomes > > amber. > > I have to wait for 1 to 1.5 minutes for the port color to become green > > and after that if load IPXODI.COM and NETX.EXE then it will connect. > > I can see this because I am sitting in front of the Cisco Switch. In > actual > > the end user will run the batch file sitting somewhere in his room and he > > will get a message "Novell Netware Server not > > Found". > > Why this delay in connecting to Novell Netware through Cisco Switch. The > > same > > delay is not happening while we are connecting to 3Com Switch. > > We need you help and guidance to sort out this problem. > > Ismail Al-shelh > > > > [GroupStudy.com removed an attachment of type application/ms-tnef] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37388&t=37374 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]