Check out the link I pasted in my original email on how to configure a Layer 3 channel. It shows these commands and a little more:
Router# configure terminal Router(config)# interface port-channel 1 Router(config-if)# ip address 172.32.52.10 255.255.255.0 I never saw it before... Jeffrey Reed Classic Networking, Inc. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Larry Letterman Sent: Thursday, March 14, 2002 3:17 PM To: [EMAIL PROTECTED] Subject: RE: L2 VS L3 EtherChannel [7:38272] You cant set etherchannel to a layer 3 address, not in any of the cisco switches I had. Its only a layer 2 link, not a layer 3 link. Larry Letterman Cisco Systems [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jeffrey Reed Sent: Thursday, March 14, 2002 11:02 AM To: [EMAIL PROTECTED] Subject: L2 VS L3 EtherChannel [7:38272] When would you use Layer 3 EtherChannel? Ive bonded layer two links together before, but not sure when you could/should use the layer 3 EtherChannel? http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/ios127xe/config/ channel.htm#12748 Thanks!! Jeff Confidential e-mail for addressee only. Access to this e-mail by anyone else is unauthorized. If you have received this message in error, please notify the sender immediately by reply e-mail and destroy the original communication. 1 Confidential e-mail for addressee only. Access to this e-mail by anyone else is unauthorized. If you have received this message in error, please notify the sender immediately by reply e-mail and destroy the original communication. 1 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38292&t=38272 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]