HI Guys

I have an OSPF question andmy network setup is as follows:

R1------Switch------R2
R1 has an ip addres of 10.103.56.97/20 and R2 has an ip address of
10.103.56.1/21. Under OSPF the foll network command is present
network 10.103.56.0 0.0.7.255 area 8.
Both the routers are in the same area.
The problem is that they dont form neighbours.
When i ping 224.0.0.5 from both the routers both of them respond and there
is no problem at layer3, ican ping each other.
i did a debug on R1 and get the foll
 OSPF: Mismatched hello parameters from 10.103.56.1
 Dead R 40 C 40, Hello R 10 C 10  Mask R 255.255.248.0 C 255.255.240.0

Its a plain config with no changes to the timer, i am assuming that since
they are a broadcast ospf net work they should form neighbours.

Also the foll output will be helpfull,

R1#FastEthernet1/0 is up, line protocol is up
  Internet Address 10.103.56.97/20, Area 8
  Process ID 65514, Router ID 209.25.40.16, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State DR, Priority 1
  Designated Router (ID) 209.25.40.16, Interface address 10.103.56.97
  No backup designated router on this network
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    Hello due in 00:00:03
  Neighbor Count is 0, Adjacent neighbor count is 0
  Suppress hello for 0 neighbor(s)
-----------------------------------------
R2#sh ip ospf in FastEthernet0/0
FastEthernet0/0 is up, line protocol is up
  Internet Address 10.103.56.1/21, Area 8
  Process ID 65514, Router ID 10.96.255.70, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State DR, Priority 1
  Designated Router (ID) 10.96.255.70, Interface address 10.103.56.1
  No backup designated router on this network
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    Hello due in 00:00:07
  Index 4/4, flood queue length 0
  Next 0x0(0)/0x0(0)
  Last flood scan length is 0, maximum is 0
  Last flood scan time is 0 msec, maximum is 0 msec
  Neighbor Count is 0, Adjacent neighbor count is 0
  Suppress hello for 0 neighbor(s)

Pls advise, i am going crazy over it.

Thanks in advance.

cheers
naresh



Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=38312&t=38312
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to