Thanks for the info. I used a vitual-template for the t-1's and a group-async for the modems and enabled multli-link for them. I'm not sure if that will work for ISDN, I'm using analog only.
""Michael Williams"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Yes. Setup your AAA like so: > > aaa new-model > aaa authentication login default group radius enable > aaa authentication ppp use-radius group radius > > When configuring the interface, say Dialer1, you configure the > encapsulation, then configure the authentication like so: > > interface Dialer1 > description Interface for dial-in users > encapsulation ppp > ppp authentication [chap | pap] use-radius > > This will tell the incoming ppp dial-up to authenticate using radius. By > simply not including the "ppp authentication" command on the T1s interface > configuration, that should make it where the T1s don't require any > authentication, thus the AAA authentication we defined in AAA doesn't affect > those interfaces. > > I don't know if you're using a Virtual-Template to form your multilink or if > you're configuring your multilink bundle (T1s) manually. A problem I > haven't been able to solve is this: I'm using Virtual-Template to multilink > my two T1s, but I'd also like to configure a different Virtual-Template (if > that's even possible) for the Dialer interface to use so that people dialing > in with ISDN (BRI) can bond their B channels together for 128K pipe. But I > haven't found a way to use virtual-templates in a way that lets you define > more than one "use" for it. > > I've got a config of a 3640 I setup with two T1s using PPP Multilink on the > same router that's also configured with 18 MICA digital modems with T1-PRI > w/built-in CDU (only 18 lines active tho) to accept either analog or ISDN > BRI digital calls. If you would like, I can e-mail a copy. > > HTH, > Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38791&t=38665 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]