Ellis,
Point 1 . Pass Point 2. Loopbacks in ospf are always advertised as stub networks, ie: /32 routes. You can change the network type on the loopback by using the command ' ip ospf network point-to-point ' the route will be seen by others as a route to a subnet. HTH Richard Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38912&t=38908 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
