I would hate to ask the obvious but are your interfaces showing high error
rates? Are they at half duplex? Are they at 10mb? Is the switch the
inside interface is plugged into stable? what about the router on the other
side?
-Patrick
>>> "Mohannad Khuffash" 03/20/02 02:47PM >>>
Dear all,
My problem with th PIX still present! the throughput between my inside
cleints an the out side ftp server still very low ! the only node between
them is the PIX,and the speed cann't be more than 50K B/s, i have checked
the two cisco fixing problem for such like these cases: DNS pointer and
IDENT protocols, but the problem is still present .... Please can any one
help me ?
Thanks in advance for your efforts
--
Mohannad N. Khuffash
Network Administrator
Palestine Telecommunication Company
Tel: 00972-02-2982330
Fax:00972-02-2980235
>>>>>>>>>>>>> Confidentiality Disclaimer <<<<<<<<<<<<<<<<
This email and any files transmitted with it may contain confidential and
/or proprietary information in the possession of WellStar Health System,
Inc. ("WellStar") and is intended only for the individual or entity to whom
addressed. This email may contain information that is held to be
privileged, confidential and exempt from disclosure under applicable law. If
the reader of this message is not the intended recipient, you are hereby
notified that any unauthorized access, dissemination, distribution or
copying of any information from this email is strictly prohibited, and may
subject you to criminal and/or civil liability. If you have received this
email in error, please notify the sender by reply email and then delete this
email and its attachments from your computer. Thank you.
================================================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=39080&t=38955
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
