I have seen that before. If I remember correctly, the router had corrupted memory. ""Ole Drews Jensen"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I have not seen that error myself, but maybe this is what's happening > (copied from cco): > > Adding the command distribute-list access-list out rip to an active IPX > ROUTER NLSP process causes the router to display the following error > message, after which the router reloads: > > Local Timeout (control reg=0x118) Error, address: 0x4000C74 at 0x30F4D7C > (PC) > > Hth, > > Ole > > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Ole Drews Jensen > Systems Network Manager > CCNP, MCSE, MCP+I > RWR Enterprises, Inc. > [EMAIL PROTECTED] > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > http://www.RouterChief.com > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > Need a Job? > http://www.OleDrews.com/job > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ > > > > > -----Original Message----- > From: Biswajeet Das [mailto:[EMAIL PROTECTED]] > Sent: Friday, March 22, 2002 5:48 AM > To: [EMAIL PROTECTED] > Subject: CISCO 2500 router [7:39135] > > > Hi, > > I have a CISCO 2500 series router and last time there was a power problem > due to which now everytime I boot I get the following message > > System Bootstrap, Version 11.0(10 C), SOFTWARE > Copyright (C) 1986-1996 by Cisco Systems > 2500 processor with 2048 Kbytes of main memory > Local Timeout (control reg=0x118) Error, address 0x2130000 at 0x10109DA(PC) > > The above message keeps on repeating and the OK LED in front of the Router > keeps blinking continuously. > > What could be the problem and the solution for it.
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39149&t=39135 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
