I setup, configured, and rolled out Secure ACS for over 80 routers and switches in our network. The hardest part was the router and switch AAA commands associated with Tacacs authentication. After I tweeked and tested the AAA configs on the routers and switches in my test network, I put the configs into notepad, created Network Groups, added all the routers and switches in ACS, and I manually cut and paste the configs to all the routers and switches. You could push out the configs using Ciscoworks, but doing it manually is probably best because if anything goes wrong you may get locked out of your own routers, and you'll have to reboot the routers to get in again. Hope this helps.
Audy ""Patrick Ramsey"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > You mean take a long time? One script could have all 100 routers done in > minutes... if you have ciscoworks, use that. > > -Patrick > > >>> "Andaluz Danny" 03/23/02 02:43PM >>> > Mangement just approved us getting ACS for Windows. Anyone have any tips or > tricks they might want to share. We have over 100 routers in our network, > so it's going to be one hell of a project. > > TIA > Danny > >>>>>>>>>>>>> Confidentiality Disclaimer This email and any files transmitted with it may contain confidential and > /or proprietary information in the possession of WellStar Health System, > Inc. ("WellStar") and is intended only for the individual or entity to whom > addressed. This email may contain information that is held to be > privileged, confidential and exempt from disclosure under applicable law. If > the reader of this message is not the intended recipient, you are hereby > notified that any unauthorized access, dissemination, distribution or > copying of any information from this email is strictly prohibited, and may > subject you to criminal and/or civil liability. If you have received this > email in error, please notify the sender by reply email and then delete this > email and its attachments from your computer. Thank you. > > ================================================================ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39313&t=39310 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
