I already have a template as I have tested this is a lab. I should be OK. I did make one stupid mistake though. In the GUI, I managed to lock myself out of administrative privileges. I called Cisco and they told me I had to reinstall. Pretty funny, huh?
Thanks, Danny ""Audy Bautista"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I setup, configured, and rolled out Secure ACS for over 80 routers and > switches in our network. The hardest part was the router and switch AAA > commands associated with Tacacs authentication. After I tweeked and tested > the AAA configs on the routers and switches in my test network, I put the > configs into notepad, created Network Groups, added all the routers and > switches in ACS, and I manually cut and paste the configs to all the routers > and switches. You could push out the configs using Ciscoworks, but doing it > manually is probably best because if anything goes wrong you may get locked > out of your own routers, and you'll have to reboot the routers to get in > again. Hope this helps. > > Audy > > ""Patrick Ramsey"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > You mean take a long time? One script could have all 100 routers done in > > minutes... if you have ciscoworks, use that. > > > > -Patrick > > > > >>> "Andaluz Danny" 03/23/02 02:43PM >>> > > Mangement just approved us getting ACS for Windows. Anyone have any tips > or > > tricks they might want to share. We have over 100 routers in our network, > > so it's going to be one hell of a project. > > > > TIA > > Danny > > >>>>>>>>>>>>> Confidentiality Disclaimer This email and any files > transmitted with it may contain confidential and > > /or proprietary information in the possession of WellStar Health System, > > Inc. ("WellStar") and is intended only for the individual or entity to > whom > > addressed. This email may contain information that is held to be > > privileged, confidential and exempt from disclosure under applicable law. > If > > the reader of this message is not the intended recipient, you are hereby > > notified that any unauthorized access, dissemination, distribution or > > copying of any information from this email is strictly prohibited, and may > > subject you to criminal and/or civil liability. If you have received this > > email in error, please notify the sender by reply email and then delete > this > > email and its attachments from your computer. Thank you. > > > > ================================================================ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39315&t=39310 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
