Hi Sean, I found this on the Cisco site: for OSPF in a Frame Relay network, OSPF requires the selection of a designated router; OSPF treats a nonbroadcast, multiaccess network such as Frame Relay in much the same way as it treats a broadcast network. This required manual assignment in the OSPF configuration using the neighbor interface router command. When the frame-relay map command is included in the configuration with the broadcast keyword, and the ip ospf network command (with the broadcast keyword) is configured, there is no need to configure any neighbors manually. OSPF will now automatically run over the Frame Relay network as a broadcast network.
Hope this helps. Regards, Georg Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39433&t=39428 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
