I don't know what your seeing but having wedged 5500 in that past... Assuming you have a SUPII or III do you have another sup card to which you can download an image, plug it into the OSless cat an boot it up?
Dave "[EMAIL PROTECTED]" wrote: > > Hi. > > I am trying to upload cat os 6.33 on my 5509 it gives me this error what > could be the prob ? > > rommon 2 > xmodem -s 38400 > Do not start the sending program yet... > > Invoke this application only for disaster recovery. > > Do you wish to continue? (y/n) [n]: y > > Note, if the console port is attached to a modem, both the > > console port and the modem must be operating at the same baud > > rate. Use console speed 38400 bps for download? (y/n) [n]: y > > Download will be performed at 38400 bps. Make sure your terminal > > emulator is set to this speed > > Baud rate is correctly set now. Enter y to continue (y/n) [n]: y > > Download Complete! > received file size=5340800 > > Loading Network Management Processor image > > Uncompressing file: ################## > *** Bus Error (Load) Exception *** > Access address = 0x0 > > *** TLB (Load/Fetch) Exception *** > Access address = 0xfffffd78 > PC = 0x80010604, Cause = 0x8008, Status Reg = 0x3041d003 > > monitor: command "xmodem" aborted due to exception > rommon 3 > > > Any help will be of good help. > Thanks and Rgds, > Murali -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39530&t=39515 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
