Try setting it on output. It should work on downloads. ~Hani Mustafa At 01:15 PM 3/27/2002 -0500, Steven A. Ridder wrote: >What was the resolution? > >-- > >RFC 1149 Compliant. >Get in my head: >http://sar.dynu.com > > >""Ladrach, Daniel E."" wrote in message >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Make sure you turned on CEF. Also, make sure your access-lists are >correct. > > > > Daniel Ladrach > > CCNA, CCNP > > WorldCom > > > > > > -----Original Message----- > > From: Cisco Breaker [mailto:[EMAIL PROTECTED]] > > Sent: Tuesday, March 26, 2002 11:12 AM > > To: [EMAIL PROTECTED] > > Subject: CAR bandwidth limitation problem [7:39533] > > > > > > Hi all, > > > > I wanted to limit our internet usage so I applied rate-limit command to >our > > internet routers serial interface bu couln't make it work. configuration >is > > below. what I wanted to do is I want to give 96000 bits bandwidth to users > > who come from the firewall with 192.168.2.5 and I want to give all the > > others who are coming with ip address 192.168.2.6 only 16000 bits. But it > > doesnt work, when I look with sh int ser 0 rate-limit, all I see is >nothing > > conformed. I applied it as input because download is important for us not > > upload. Any help will be appreciated? I am tired of trying so many things >so > > I thought maybe someone can help. > > > > Best regards, > > > > Cisco Breaker, > > CCNP,CCDP > > > > Router#sh run > > Building configuration... > > > > Current configuration : 1959 bytes > > ! > > interface Ethernet0 > > ip address 192.168.1.3 255.255.255.0 > > > > interface Serial0 > > ip address 192.168.2.2 255.255.255.252 > > rate-limit input access-group 5 96000 8000 16000 conform-action transmit > > exceed-action drop > > rate-limit input access-group 110 16000 1500 2000 conform-action transmit > > exceed-action drop > > ! > > interface Serial1 > > no ip address > > ! > > no ip classless > > ip route 0.0.0.0 0.0.0.0 192.168.2.1 > > no ip http server > > ! > > no logging trap > > access-list 5 permit 192.168.2.5 log > > access-list 110 permit ip host 192.168.2.6 any log > > > > Router#sh int ser 0 rat > > Serial0 > > Input > > matches: access-group 5 > > params: 96000 bps, 8000 limit, 16000 extended limit > > conformed 0 packets, 0 bytes; action: transmit > > exceeded 0 packets, 0 bytes; action: drop > > last packet: 1213151652ms ago, current burst: 0 bytes > > last cleared 00:24:18 ago, conformed 0 bps, exceeded 0 bps > > matches: access-group 110 > > params: 16000 bps, 1500 limit, 2000 extended limit > > conformed 0 packets, 0 bytes; action: transmit > > exceeded 0 packets, 0 bytes; action: drop > > last packet: 1213151692ms ago, current burst: 0 bytes > > last cleared 00:23:58 ago, conformed 0 bps, exceeded 0 bps
Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39787&t=39533 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]