The interface-dlci command can be used on a multipoint interface as well, and exist with a map statement. Using it this way lets you specify QoS for a DLCI.
Example: frame map ip x.x.x.x 101 frame map ip x.x.x.x 102 frame interface-dlci 101 class dlci101 frame interface-dlci 102 class dlci102 --- MADMAN wrote: > interface dlci command = point-to-point > map = multipoint > > in a nut shell > > Dave > > cage wrote: > > > > I do want to know the truth of the frame-relay > interface-dlci XXX and the > > diference between it and the command map? > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Yahoo! Movies - coverage of the 74th Academy Awards. http://movies.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39767&t=39331 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]