For some reason some old 2503s seem to have this problem. I have run into it myself. Make sure you have your terminal settings set correctly (check the baud rate, stop bits, and flow control). If that doesn't work, try using a different computer (I seem to have the best luck using an NT machine).
thanks, -Brad Ellis CCIE#5796 (R&S / Security) Network Learning Inc [EMAIL PROTECTED] www.optsys.net (Cisco hardware) ""Widjaja Surja Kentjana"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all, > > Have just got a Cisco 2503. I am not able to console, I believe it is > faulty. I need to clear the password. Tried to use AUX, but AUX is only > available when the IOS is loaded. > > Any other way out or workaround it? > > Thanks. > > Widjaja Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40562&t=40559 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]