After seeing this thread I remembered having two 2500's in the lab I couldn't talk to but could see data from it. I went back and diabled flowcontrol, teraterm, and it worked fine!!
Dave CiscoB wrote: > > For some reason some old 2503s seem to have this problem. I have run into > it myself. Make sure you have your terminal settings set correctly (check > the baud rate, stop bits, and flow control). If that doesn't work, try > using a different computer (I seem to have the best luck using an NT > machine). > > thanks, > -Brad Ellis > CCIE#5796 (R&S / Security) > Network Learning Inc > [EMAIL PROTECTED] > www.optsys.net (Cisco hardware) > > ""Widjaja Surja Kentjana"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi all, > > > > Have just got a Cisco 2503. I am not able to console, I believe it is > > faulty. I need to clear the password. Tried to use AUX, but AUX is only > > available when the IOS is loaded. > > > > Any other way out or workaround it? > > > > Thanks. > > > > Widjaja -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40600&t=40559 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
