Kent Hundley wrote: > However, there > is a "remote > span" capability that has been added to the 6000 series in 5.3 > code that > does allow you to see the traffic for an entire vlan from any > switch in the > net: > > http://www.cisco.com/warp/public/473/41.html#remote
Is there an equivalent version in Native IOS for the 6000/6500 series? I'll go and see if I can find one, but just thought if you knew of one off of the top of your head, I'd ask. Mike W. PS: As Priscilla mentioned, If you're running a 6500 with even one full blade of 10/100 ports worth of ports in a single VLAN, it seems that doing a "remote span" wouldn't do much good unless you're spanning to a Gig port (or better yet to a Gig etherchannel, if that's even possible) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40883&t=40816 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
