Hello wondered if anyone can explain. I have extended access lists working fine.
I have a few blocks of ip address I want to add to list and they are not all consequtive. What I want to do is use the minimum entry to cover each block. i.e Say I had several like this 192.168.1.10 to 15 etc etc I want to make a single entry for every consequtive block. I do not own the whole range or subnet. Can I do something like this. access list 101 permit tcp 192.168.1.10 0.0.0.6 193.26.1.52 eq www What I am wanting to clarify is if I have the wildard bit right. In above example was hoping that 0.0.0.6 would be 6 addresses (192.168.1.10 to 15)...have I understood this right?. do not want to match whole subnet with 0.0.0.255 but that is the only other examples I have seen. Many thanks Paul Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40904&t=40904 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]