I need some help for a Access Server setup. I am trying to setup a modem (netcomm 56.6k) to connect to a 2511. The modem is currently connected to the AUX port. However, no matter what I tried from my PC, everytime I make a connection, it comes up with a whole bunch of garbage.
OK OK OK CARRIER 31200 PROTOCOL: NONE CONNECT 31200 __sSM~ErX9D`?ro"x`?@!S,@@`# B #o `@DZG?@"Z(S(?|p? cF42EmXUj"hYLh8[$ DD<>>06#"\(sqOKobt^U"Bt08 S,,R '! P kfh(?L^H &E`jeDL?ez^P}}N\NAs-) ^al8b.ZTa!('P"Q-7sE-aOP> qGU!'!8"d/^erK?Oni`Stn!ma}8.e"j? zCg_$!hG"3gO?P g77 (FE. FpO]%?XB^P S.TS&eT8' 1gciz$F~?*@yV -=T<a&KKili#VA39D"CJf9E2F|uMlza#-~* And here is the config for the 2511 - con1.hkg#sh run Building configuration... Current configuration: ! ! Last configuration change at 16:58:36 AEST Wed Apr 10 2002 ! NVRAM config last updated at 16:58:49 AEST Wed Apr 10 2002 ! version 11.2 no service pad service timestamps debug datetime msec show-timezone service timestamps log datetime msec show-timezone service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname con1.hkg ! aaa new-model aaa authentication login default enable aaa authentication login tacacs-login tacacs+ enable aaa authentication login NO_AUTHEN none aaa authorization exec tacacs+ if-authenticated aaa authorization commands 0 tacacs+ if-authenticated aaa authorization commands 1 tacacs+ if-authenticated aaa authorization commands 15 tacacs+ if-authenticated aaa accounting exec start-stop tacacs+ aaa accounting commands 0 start-stop tacacs+ aaa accounting commands 1 start-stop tacacs+ aaa accounting commands 15 start-stop tacacs+ enable secret 5 $1$oWH7$vULnq40DABAEnJCyCzTR4. ! ip subnet-zero no ip domain-lookup ip host br1.hkg 2001 172.16.1.1 ip host br2.hkg 2002 172.16.1.1 ip host dist-sw1.hkg 2003 172.16.1.1 ip host sw1.hkg 2004 172.16.1.1 ip host sw2.hkg 2005 172.16.1.1 ip host sw3.hkg 2006 172.16.1.1 ip host sw4.hkg 2007 172.16.1.1 ip host modem 2017 172.16.1.1 ip name-server 10.1.0.1 clock timezone AEST 10 ! interface Loopback0 ip address 172.16.1.1 255.255.255.255 no ip redirects no ip unreachables no ip directed-broadcast no ip proxy-arp no ip route-cache no ip mroute-cache ! interface Ethernet0 ip address 10.6.255.1 255.255.0.0 no ip redirects no ip unreachables no ip directed-broadcast no ip proxy-arp no ip route-cache no ip mroute-cache ! interface Serial0 no ip address no ip redirects no ip unreachables no ip directed-broadcast no ip proxy-arp no ip route-cache no ip mroute-cache shutdown ! interface Serial1 no ip address no ip redirects no ip unreachables no ip directed-broadcast no ip proxy-arp no ip route-cache no ip mroute-cache shutdown ! interface Async17 ip unnumbered Loopback0 no ip redirects no ip unreachables no ip directed-broadcast no ip proxy-arp encapsulation ppp no ip route-cache no ip mroute-cache peer default ip address pool NetOpspool ppp authentication chap pap ! ip local pool NetOpspool 10.6.255.17 ip default-gateway 10.6.255.252 ip classless ip route 0.0.0.0 0.0.0.0 10.6.255.252 logging buffered 20000 debugging logging trap debugging logging 10.1.0.1 access-list 11 deny any access-list 12 permit 172.16.1.1 access-list 12 deny any access-list 99 permit 10.0.0.0 0.255.255.255 access-list 99 permit x.x.x.x y.y.y.y access-list 99 deny any tacacs-server host 10.1.0.1 tacacs-server key xxxxxxxxxx snmp-server community roxwap37 RW 99 snmp-server community tobyup91 RO 99 snmp-server trap-authentication snmp-server system-shutdown snmp-server enable traps config banner motd ^C ******************** **** con1.hkg **** ******************** ^C ! line con 0 exec-timeout 0 0 login authentication NO_AUTHEN transport input none line 1 16 session-timeout 60 no exec exec-timeout 0 0 transport input all line aux 0 password 7 030752180500 login authentication NO_AUTHEN modem InOut modem autoconfigure type default transport input all stopbits 1 rxspeed 38400 txspeed 38400 flowcontrol hardware line vty 0 4 access-class 99 in password 7 0111071C5004125E70 login authentication tacacs-login ! ntp clock-period 17179982 ntp server 10.1.0.1 end P.S: However, I can reverse telnet into the modem with no problems. con1.hkg#telnet modem Trying modem (172.16.1.1, 2017)... Open ******************** **** con1.hkg **** ******************** at OK at OK con1.hkg#sh line 17 Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns * 17 AUX 38400/38400 - inout - - - 5 0 0/0 Line 17, Location: "", Type: "" Length: 24 lines, Width: 80 columns Baud rate (TX/RX) is 38400/38400, no parity, 1 stopbits, 8 databits Status: Ready, Connected, Active, No Exit Banner, Modem Detected Capabilities: Hardware Flowcontrol In, Hardware Flowcontrol Out Modem Callout, Modem RI is CD, Modem Autoconfigure Modem state: Ready Modem hardware state: CTS* noDSR DTR RTS, Modem Configured Special Chars: Escape Hold Stop Start Disconnect Activation ^^x none - - none Timeouts: Idle EXEC Idle Session Modem Answer Session Dispatch 00:10:00 never none not set Idle Session Disconnect Warning never Modem type is default. Session limit is not set. Time since activation: 00:02:52 Editing is enabled. History is enabled, history size is 10. DNS resolution in show commands is enabled Full user help is disabled Allowed transports are pad v120 telnet rlogin. Preferred is telnet. No output characters are padded No special data dispatching characters Any ideas will be greatly appreciated :) Best Regards, Lee Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41002&t=41002 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]