Check the Software Advisor http://www.cisco.com/cgi-bin/Support/CompNav/Index.pl?Introduction=True
You'll find that you need Enterprise, Service Provider, or Telco feature sets. David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > nntp.groupstudy.com > Sent: Wednesday, April 10, 2002 10:09 PM > To: [EMAIL PROTECTED] > Subject: Problem to configure IS-IS [7:41139] > > > Hi, Group, > > I am trying to configure IS-IS at CCIE lab, and two of my router did not > allow > me to get into the IS-IS router mode. I wonder if anyone can tell me what > the > problem is. See following router output: > > Thanks > > Ruihai > > > IOS (tm) 3600 Software (C3640-D-M), Version 12.2(6), RELEASE > SOFTWARE (fc2) > System image file is "flash:c3640-d-mz.122-6.bin" > cisco 3640 (R4700) processor (revision 0x00) with 27648K/5120K bytes of > memory. > > > R1-3600#conf t > Enter configuration commands, one per line. End with CNTL/Z. > R1-3600(config)#router isis > R1-3600(config)# > R1-3600(config)# Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41141&t=41139 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
