The only time I have seen this information present is on a router whose access is restricted by AAA via RADIUS or TACACS+....... Other than that, how would the router magically "know" who was logged in and making changes?
Mike W. wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello everybody, > > I have one question for you. We have several routers that shows > who and when made last changes in the configuration and who/when saved that > changes in NVRAM. > > For example: > > Router# show run > > ........... > ........... > > Current configuration : 2352 bytes > ! > ! Last configuration change at 11:45:15 UTC Tue > Apr 9 by XXX > ! NVRAM config last updated at 12:23:50 UTC Thu > Apr 4 2002 by XXX > ! > > ........... > ........... > > How can I activate this messages in other routers?? We have other > routers with the same IOS, almost the same configuration and they don't > show these messages!!!!! I am very interested in this.... > > Thanks a lot!!!!!!!!! > > Mike. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41671&t=41580 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
