We are trying to use a Truetime XL-DC GPS to provide timing to a Cisco 8540 via wire wrap pins to an ATM E-1 BNC connector. Has anyone in the group ever worked with this combination? If so, please send a list of materials you used to connect the two devices. The manual says the XL-DC will provide a framed signal via the optional interface, 87-6000E1-5, with BNC connectors, no wire wrap, but their tech support says it will only do that via wire wrap.
I am not convinced that we cannot get this combiniation to work but time is of the essence so now I need to know what parts to buy. Tech support is not very clear on this topic - saying we use clips in our lab. Clips in the real world just will not suffice. Also, any configuration options you utilized on the 8540 would be appreciated. Thanks... Tom Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41808&t=41808 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
