Get rid of the Modem Autoconfigure line, and see what happens. Mark -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mayo, Simer Sent: Thursday, April 18, 2002 6:22 PM To: [EMAIL PROTECTED] Subject: US Robotics modem to Cisco 2514 [7:41894]
I'm trying to connect a US Robotics sportster modem to a Cisco 2514 thru the aux port. The dip switches on the modem: one, three and eight are down and all others are up. Config: line aux 0 login password password modem inout modem autoconfigure type usr_sportster transport input all flowcontrol hardware stopbits 1 speed 38400 When i reverse telnet into the modem it prompts for the password and OK but after that i cant type anything. The only way out is cancel the session (Ctrl+Shft+6..x) and then disconnect. I have tried using the modem autoconfigure discovery but it couldn't find the modem...i checked this debuging confmodem On sh line 1: Modem state: Ready Modem hardware state: noCTS noDSR DTR RTS: Any help will be appreciated. Thanks Simer Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=41898&t=41894 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
