We have an Catalyst 8540 with a BVI. There are numerous ports on the switch that are in this bridge group. If you look at the BVI interface, sh int bvi2:
MTU 1500 bytes, BW 10000 Kbit, DLY 5000 usec, rely 255/255, load 1/255 The true speed of the devices plugged into the ports is manually set to 100Mbps. But using our network management software which reads the MIB in the switch interfaces, it reads the devices as a speed of 10Mbps. I think the MIB is using the data from the BVI (BW 10000 Kbit) and not the real port/interface speed. Does the BVI2 have a true speed of only 10Mbps? What would it do to change the BW from 10000 Kbit to 100000 Kbit (10Mbps to 100Mbps) manually? Thanks for any ideas. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=42370&t=42370 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]