Dear Group Members,
This is my first message.... please accept apologies
for any mistakes. However, I seek help for the
following problem.....
Here is the setup!
IPX Network: 100
-----------|------------------|---
| |
RTR-1 RTR-AL
/ / |(1c10)
/ / |
(1120)/ / SWITCH1
/ / |
/ /(1210) | (1100)
RTR-2 RTR-3
Problem:
****************************************************
IPX routing is enabled on all the routers. I can ping
(IPX) RTR-AL from RTR-3 but can not perform
TRACEROUTE? Any help will be much appreciated?
****************************************************
Output from ROUTER-3 (RTR-3)
-------------------------------
RTR-3#
RTR-3#ping 100.0000.0c3d.d1eb
Translating "100.0000.0c3d.d1eb"
Type escape sequence to abort.
Sending 5, 100-byte IPX Novell Echoes to
100.0000.0c3d.d1eb, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip
min/avg/max = 32/35/44 ms
RTR-3#
RTR-3#
RTR-3#traceroute ipx 100.0000.0c3d.d1eb
Type escape sequence to abort.
Tracing the route to 100.0000.0c3d.d1eb
0 * * *
1 * * *
2 * * *
3 * * *
... tracing the route using Diagnostic Requests
4 * * *
RTR-3#
__________________________________________________
Do You Yahoo!?
Yahoo! Health - your guide to health and wellness
http://health.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=43327&t=43327
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
