IPX traceroute is somewhat new. Are the other routers running an older version of the IOS by any chance?
Priscilla At 04:55 AM 5/5/02, Arjun Das wrote: >Dear Group Members, > >This is my first message.... please accept apologies >for any mistakes. However, I seek help for the >following problem..... > >Here is the setup! > > > IPX Network: 100 > -----------|------------------|--- > | | > RTR-1 RTR-AL > / / |(1c10) > / / | > (1120)/ / SWITCH1 > / / | > / /(1210) | (1100) > RTR-2 RTR-3 > >Problem: >**************************************************** >IPX routing is enabled on all the routers. I can ping >(IPX) RTR-AL from RTR-3 but can not perform >TRACEROUTE? Any help will be much appreciated? >**************************************************** > >Output from ROUTER-3 (RTR-3) >------------------------------- >RTR-3# >RTR-3#ping 100.0000.0c3d.d1eb >Translating "100.0000.0c3d.d1eb" > >Type escape sequence to abort. >Sending 5, 100-byte IPX Novell Echoes to >100.0000.0c3d.d1eb, timeout is 2 seconds: >!!!!! >Success rate is 100 percent (5/5), round-trip >min/avg/max = 32/35/44 ms >RTR-3# >RTR-3# >RTR-3#traceroute ipx 100.0000.0c3d.d1eb > >Type escape sequence to abort. >Tracing the route to 100.0000.0c3d.d1eb > > 0 * * * > 1 * * * > 2 * * * > 3 * * * > > ... tracing the route using Diagnostic Requests > 4 * * * >RTR-3# > >__________________________________________________ >Do You Yahoo!? >Yahoo! Health - your guide to health and wellness >http://health.yahoo.com ________________________ Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43358&t=43327 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
