Which model switch is it? If it's running IOS then you simply need an IP on interface VLAN1. By defaults all ports are in VLAN1, but if you've changed it around, you need to make a port in VLAN1 and connect to it.....
If it's using the CatOS, then make sure you're plugging into a port (again) on VLAN1 since that's the default mgmt VLAN (i.e. can communicate with sc0) Mike W. "Alexandre Carvalho" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello Guys, > I have a weird problem with upgrading my switch and I was wondering if > somebody could help me out. > My laptop is in the same subnet as the switch , but I cannot ping each > other. I am running tftp server in my laptop so if I cannot ping I cannot > upgrade it. I check the port where my laptop is connected and it says OK. > Any ideas?? > > Laptop: 10.2.2.1 /16 > Switch : 10.2.2.2 /16 > > Command used in the switch : set interface sc0 10.2.2.2 255.255.0.0 > > Thanks, > > Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43363&t=43348 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
