Are both ports on the same vlan????? Also you'll need to set the sc0 to the correct vlan by:
set interface sc0 And the computer need to be on the same vlan: set vlan Make sure you set the correct speed and duplex setting on the port for the computer. You should see the port for the computer as connected. Jim Walker -----Original Message----- From: Wayne Jang [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 07, 2002 8:24 AM To: [EMAIL PROTECTED] Subject: Re: Code upgrade switch catalyst 1200 [7:43348] what port are you plugged into on the switch? can you print in an email the "show interface" command? ""Alexandre Carvalho"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hello Guys, > I have a weird problem with upgrading my switch and I was wondering if > somebody could help me out. > My laptop is in the same subnet as the switch , but I cannot ping each > other. I am running tftp server in my laptop so if I cannot ping I cannot > upgrade it. I check the port where my laptop is connected and it says OK. > Any ideas?? > > Laptop: 10.2.2.1 /16 > Switch : 10.2.2.2 /16 > > Command used in the switch : set interface sc0 10.2.2.2 255.255.0.0 > > Thanks, > > Alex Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=43486&t=43348 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]