What are you balancing on? Have you configured the CSS to balance on
least connections because the default is round robin. These are your
load balancing options, Round Robin(default),Weighted Round Robin,Least
Connections/Bytes, and
ArrowPoint Content Aware (ACA).
If you want to balance based on least connections, in the content rule
specify "balance leastconn" to balance based on connections.
Sincerely,
Patrick J Greene
-----Original Message-----
From: Cisco Breaker [mailto:[EMAIL PROTECTED]]
Sent: Monday, May 13, 2002 3:26 AM
To: [EMAIL PROTECTED]
Subject: Terminal Server load balancing [7:44002]
Hi,
We have implemented load balancing between 5 microsoft terminal servers.
The problem is when I looked at the second server I see 5 people
connected but from the CSS view there is only 2 people connected. We
tried this example with clearing counters on CSS and restarting all
terminal servers to make sure everyone disconnected. After that again we
check the statistics and nothing changed. For ex. Cisco shows 4
Microsoft shows 8.
All the statistic gathered by issuing sh service summary and sh summary
are not accurate as Microsoft Terminal Server Managers.
What can be the problem?
Any help will be appreciated?
Best regards,
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=44209&t=44002
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
