Okay....... we've got a 5513 with RSM and a 6509 with Sup2 + MSFC2... they are trunked together (at layer 2). I've got HSRP configured for 7 other VLANs on the same two switches and don't have this problem with any of them except this one VLAN.
I would try to explain the problem, but here's output and config snippets from the two routers to demonstrate the problem (i.e. look at the output from the 'show stand vlan 300' command on HQ5). I've also included pings between to two to demonstrate that they can indeed communicate with each other......... Remember that none of the other VLANs (with virtually the exact same config except for different IPs/subnets works fine) Any input is appreciated! HQ7 = Sup2 w/MSFC2 in 6509 running Native IOS 12.1(8b)E7 --------- interface Vlan300 ip address 10.41.246.35 255.255.255.224 no ip redirects standby timers 5 15 standby priority 110 preempt standby ip 10.41.246.34 HQ7#show stand vlan 300 Vlan300 - Group 0 Local state is Standby, priority 110, may preempt Hellotime 5 holdtime 15 configured hellotime 5 sec holdtime 15 sec Next hello sent in 00:00:02.450 Virtual IP address is 10.41.246.34 configured Active router is 10.41.246.36 expires in 00:00:11, priority 130 Standby router is local 3 state changes, last state change 3d17h HQ7#ping 10.41.246.36 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.41.246.36, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/4 ms HQ5 = RSM in 5513 running IOS 11.3(3a)WA4(5) --------- interface Vlan300 ip address 10.41.246.36 255.255.255.224 no ip redirects standby timers 5 15 standby priority 130 standby preempt standby ip 10.41.246.34 HQ5#show stand vlan 300 Vlan300 - Group 0 Local state is Active, priority 130, may preempt Hellotime 5 holdtime 15 configured hellotime 5 sec holdtime 15 sec Next hello sent in 00:00:00.572 Hot standby IP address is 10.41.246.34 configured Active router is local Standby router is unknown expired Standby virtual mac address is 0000.0c07.ac00 HQ5#ping 10.41.246.35 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.41.246.35, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/3/8 ms Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44230&t=44230 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
