I had that problem sometimes back. upgrade the ios on HQ5 to 12.1, and your problem will disappear. guess it's a little bug in ios.
dayo --- Michael Williams wrote: > Okay....... we've got a 5513 with RSM and a 6509 > with Sup2 + MSFC2... they > are trunked together (at layer 2). I've got HSRP > configured for 7 other > VLANs on the same two switches and don't have this > problem with any of them > except this one VLAN. > > I would try to explain the problem, but here's > output and config snippets > from the two routers to demonstrate the problem > (i.e. look at the output > from the 'show stand vlan 300' command on HQ5). > I've also included pings > between to two to demonstrate that they can indeed > communicate with each > other......... Remember that none of the other > VLANs (with virtually the > exact same config except for different IPs/subnets > works fine) Any input is > appreciated! > > HQ7 = Sup2 w/MSFC2 in 6509 running Native IOS > 12.1(8b)E7 > --------- > interface Vlan300 > ip address 10.41.246.35 255.255.255.224 > no ip redirects > standby timers 5 15 > standby priority 110 preempt > standby ip 10.41.246.34 > > HQ7#show stand vlan 300 > Vlan300 - Group 0 > Local state is Standby, priority 110, may preempt > Hellotime 5 holdtime 15 configured hellotime 5 sec > holdtime 15 sec > Next hello sent in 00:00:02.450 > Virtual IP address is 10.41.246.34 configured > Active router is 10.41.246.36 expires in 00:00:11, > priority 130 > Standby router is local > 3 state changes, last state change 3d17h > > HQ7#ping 10.41.246.36 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 10.41.246.36, > timeout is 2 seconds: > !!!!! > Success rate is 100 percent (5/5), round-trip > min/avg/max = 1/2/4 ms > > HQ5 = RSM in 5513 running IOS 11.3(3a)WA4(5) > --------- > interface Vlan300 > ip address 10.41.246.36 255.255.255.224 > no ip redirects > standby timers 5 15 > standby priority 130 > standby preempt > standby ip 10.41.246.34 > > HQ5#show stand vlan 300 > Vlan300 - Group 0 > Local state is Active, priority 130, may preempt > Hellotime 5 holdtime 15 configured hellotime 5 sec > holdtime 15 sec > Next hello sent in 00:00:00.572 > Hot standby IP address is 10.41.246.34 configured > Active router is local > Standby router is unknown expired > Standby virtual mac address is 0000.0c07.ac00 > > HQ5#ping 10.41.246.35 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 10.41.246.35, > timeout is 2 seconds: > !!!!! > Success rate is 100 percent (5/5), round-trip > min/avg/max = 1/3/8 ms [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? LAUNCH - Your Yahoo! Music Experience http://launch.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44555&t=44230 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
