Can you change the logical configuration of FR by using P2P subinterfaces.
This will make all routes go via hub router. --- Cisco Nuts wrote: > Yes, policy routing could very well be the solution > without using FR map > statements. But how would I go about doing this? I > mean what kind of policy > routing needs to be in place on the spoke so that I > can ping to the other > spoke (going thru the Hub rtr). And thus, get to the > Ethernets of the spoke > routers. > > The hub router is the only one that can get to the > ethernets on the spokes > and the spoke routers can ONLY get to the ethernet > of the hub router not to > the ethernet of the other spoke. > > Could it be just static routes on the hub router > pointing the next hop to > the serial of the spoke router? > I will try this. > > But any other ideas are gratefully appreciated....I > have tired my eyes on > CCO till 3:00am in the morning and still not find > the freaking answer. > > Thank you. > > > >From: Stephen Barlow > >To: 'Cisco Nuts' > >Subject: RE: Give up...Cannot ping from one spoke > to another?? [7:43795] > >Date: Fri, 10 May 2002 07:58:19 -0400 > > > >I believe policy routing or frame maps on each > spoke would solve it. Is > >the > >next hop of the spokes the other spoke? If yes, > frame needs a layer 2 (or > >routing) to get around this. > >Hope it helps > > > >Steve > > > >-----Original Message----- > >From: Cisco Nuts [mailto:[EMAIL PROTECTED]] > >Sent: May 9, 2002 9:15 PM > >To: [EMAIL PROTECTED] > >Subject: Give up...Cannot ping from one spoke to > another?? [7:43795] > > > > > >Hello, > > > >I have RTA configed as a FR hub with multipoint > subif. I have RTB, RTC and > >RTE configed as spokes using only the serial intf. > - FR network type > >Non-Broadcast. Have 1 single FR map statement on > the spokes pointing to the > >hub. Have 3 map statements on the hub pointing back > to each of the 3 > >spokes. > > > >Have Ospf configed. Area 0 the FR network for the > serials. Area 1 on RTA, > >Area 10 on RTB and Area 4 on RTE each for the > Ethernet side. Also have the > >neighbor statement on each spoke pointing to the > hub with a priority of 2. > > > >A show ip route reveals all the OSPF networks (O IA > routes) on each router. > >I can only ping from the hub router RTA to networks > on the spoke routers > >BUT > > > >I cannot ping from one spoke router to a network on > another spoke router > >EVEN though the routes are in the routing table? > > > >Why is that? > > > >A CATCH: I am not allowed to use the ip ospf > network command anywhere nor > >FR > > > >map statements on each spoke pointing to the other > spokes?? > > > >What is the way that will allow me to ping from RTB > to RTC thru RTA the hub > >router? > > > >I tried the default-information originate on the > hub rtr. RTA but this does > >not seem to help - even though it installs a > default route on each spoke > >router. > > > >I am giving up after tiring me eyes on CCO. > > > >Anyone with any ideas? > > > >Thank you for your help. > > > > > > > > > > > >_________________________________________________________________ > >MSN Photos is the easiest way to share and print > your photos: > >http://photos.msn.com/support/worldwide.aspx > >This e-mail message is intended only for the person > or entity to which it > >is addressed > >and is confidential, subject to copyright and may > be legally privileged. > >Any > >unauthorized review, use or disclosure is > prohibited. If you received this > >in error, > >please contact the sender and delete all copies of > the e-mail together with > >any > >attachments. > > > > > > > > > _________________________________________________________________ > MSN Photos is the easiest way to share and print > your photos: > http://photos.msn.com/support/worldwide.aspx [EMAIL PROTECTED] ______________________________________________________________________ Find, Connect, Date! http://personals.yahoo.ca Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=44231&t=43795 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
